3M NOVEC 71IPA
- Light oil & particles removal / electronic components rinsing
- Vapor phase, co-solvent, flushing & drying process
- Very low surface tension
IMPORTANT NOTICE: PHASE-OUT 3M™ PRODUCTS
3M™ announced in December 2022, that all Novec™ products will be phased out and not available anymore by the end of 2025. No worries, Inventec has a drop-in replacement for this product but we recommend to contact us as soon as possible in order to minimize supply interruptions.
If you want to know more about the 3M™ products phase-out, click on the this link.
OUR ALTERNATIVE(S):
3M Novec 71IPA
3M™ Novec™ 71IPA Engineered Fluid is a hydrofluoroether, methoxy-nonafluorobutane (C4F9OCH3), in an azeotrope-like formulation with isopropanol.
This fluid is ideal for light-duty cleaning and degreasing tasks and is intended to replace ozone-depleting materials such as CFC-113, HCFC-14lb and 1,1,1-trichloroethane in many applications. It has zero ozone depletion potential and other favorable environmental properties.
Novec 71IPA fluid has a low toxicological profile, with a time-weighted average exposure guideline of 750 ppm for the 3M™ Novec™ 7100 Engineered Fluid component (eight hour average).
The increased polar soil solvency and low surface tension, non-flammability and constant composition during boiling of Novec 71IPA fluid make it ideal for precision and specialty cleaning and rinsing for removal of particulate, fingerprints and light soils from metal, plastic and glass parts.
Applications
- Precision cleaning, rinsing and drying agent – Light-duty cleaning of oils, greases, waxes, fingerprints
- Use in combination with co-solvents like Topklean EL 20 or Topklean EL20P for “no-clean flux” residue removal.
Letter from 3M – Inventec authorized distributor for EMEA area
Show links
Hide linksThis is a product valuable for our ECOPROGRAM
Products valuable for our ECOPROGRAM can be returned to us for recycling (depending on location).
- Avoid adding waste into the environment
- Avoid destruction cost
- Buy recycled products at a lower cost.
Benefits
PERFORMANCE
- Thermal and chemical stable in use (azeotropic formulation)
- The very low surface tension allows deep rinsing of parts with complex geometry
- Short rinsing and drying times
COST
- Continuous recycling in equipment for a long bath-life
- Can be returned for recycling and re-use
- The relative high boiling point reduces risk of solvent drag, so limiting consumption
HSE
- Very low toxicity (refer to the SDS)
- No Ozon Depletion Potential (ODP) & low Global Warming Potential (GDP)
- Non-flammable
Process examples
Separated Co-solvent
Mixed Co-solvent
Applications
DRYING OF SEMICONDUCTOR WAFERS
Novec™ 7100 or Novec™ 71IPA are used as a drying agent for semiconductor wafers as a drop-in alternative to IPA.
Related products & services
PROMOSOLV DR1
- Solvent for rinsing & spotless fast drying
- Co-solvent & drying process
- Low GWP: 320
- 3M Novec 71IPA replacement
PROMOSOLV DR1 T
- Light oil & particles removal / rinsing & drying
- Vapor phase, co-solvent, flushing & drying process
- Equivalent of DR1 but made from recycled solvent